2007-04-19 1 bar89... silicon pin diode ? optimized for antenna switches in hand held applications ? very low capacitance at zero volts reverse bias at frequencies above 1ghz (typ. 0.19 pf) ? low forward resistance (typ. 0.8 ? @ i f = 10ma) ? very low signal distortion ? pb-free (rohs compliant) package 1) ? qualified according aec q101 BAR89-02LRH type package configuration l s (nh) marking BAR89-02LRH tslp-2-7 single, leadless 0.4 r maximum ratings at t a = 25c, unless otherwise specified parameter symbol value unit diode reverse voltage v r 80 v forward current i f 100 ma total power dissipation t s 133c p tot 250 mw junction temperature t j 150 c operating temperature range t op -55 ... 125 storage temperature t stg -55 ... 150 thermal resistance parameter symbol value unit junction - soldering point 2) r thjs 65 k/w 1 pb-containing package may be available upon special request 2 for calculation of r thja please refer to application note thermal resistance
2007-04-19 2 bar89... electrical characteristics at t a = 25c, unless otherwise specified parameter symbol values unit min. typ. max. dc characteristics breakdown voltage i (br) = 5 a v (br) 80 - - v reverse current v r = 60 v i r - - 50 na forward voltage i f = 10 ma i f = 100 ma v f - - 0.83 0.95 0.9 1.1 v
2007-04-19 3 bar89... electrical characteristics at t a = 25c, unless otherwise specified parameter symbol values unit min. typ. max. ac characteristics diode capacitance v r = 1 v, f = 1 mhz v r = 0 v, f = 100 mhz v r = 0 v, f = 1 ghz v r = 0 v, f = 1.8 ghz c t - - - - 0.25 0.25 0.19 0.18 0.35 - - - pf reverse parallel resistance v r = 0 v, f = 100 mhz v r = 0 v, f = 1 ghz v r = 0 v, f = 1.8 ghz r p - - - 35 5 3.5 - - - k ? forward resistance i f = 1 ma, f = 100 mhz i f = 5 ma, f = 100 mhz i f = 10 ma, f = 100 mhz r f - - - 3 1.2 0.8 - - 1.5 ? charge carrier life time i f = 10 ma, i r = 6 ma, measured at i r = 3 ma, r l = 100 ? rr - 800 - ns i-region width w i - 19 - m insertion loss 1) i f = 1 ma, f = 1.8 ghz i f = 5 ma, f = 1.8 ghz i f = 10 ma, f = 1.8 ghz i l - - - 0.23 0.1 0.08 - - - db isolation 1) v r = 0 v, f = 0.9 ghz v r = 0 v, f = 1.8 ghz v r = 0 v, f = 2.45 ghz i so - - - 19 14 11 - - - 1 BAR89-02LRH in series configuration, z = 50 ?
2007-04-19 4 bar89... diode capacitance c t = ? (v r ) f = parameter 0 2 4 6 8 10 12 14 16 v 20 v r 0.1 0.15 0.2 0.25 0.3 0.35 0.4 pf 0.5 c t 1 mhz 100 mhz 1 ghz 1.8 ghz reverse parallel resistance r p = ? ( v r ) f = parameter 0 2 4 6 8 10 12 14 16 v 20 v r -1 10 0 10 1 10 2 10 3 10 kohm r p 100 mhz 1 ghz 1.8 ghz forward resistance r f = ? ( i f ) f = 100mhz 10 -2 10 -1 10 0 10 1 10 2 10 3 ma i f -1 10 0 10 1 10 2 10 3 10 ohm r f forward current i f = ? ( v f ) t a = parameter 0 0.2 0.4 0.6 0.8 v 1.2 vf -9 10 -8 10 -7 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 a if -40c +25c +85c +125c
2007-04-19 5 bar89... forward current i f = ? ( t s ) BAR89-02LRH 0 15 30 45 60 75 90 105 120 c 150 t s 0 10 20 30 40 50 60 70 80 90 100 ma 120 i f permissible puls load r thjs = ? ( t p ) BAR89-02LRH 10 -6 10 -5 10 -4 10 -3 10 -2 10 0 c t p -1 10 0 10 1 10 2 10 ma r thjs 0.5 0.2 0.1 0.05 0.02 0.01 0.005 d = 0 permissible pulse load i fmax / i fdc = ? ( t p ) BAR89-02LRH 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 10 1 c t p 0 10 1 10 2 10 ma if d = 0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 insertion loss i l = -|s 21 | 2 = ? ( f ) i f = parameter BAR89-02LRH in series configuration, z = 50 ? 0 1 2 3 4 ghz 6 f -0.4 -0.35 -0.3 -0.25 -0.2 -0.15 -0.1 db 0 | s 21 | 10ma 5ma 1ma
2007-04-19 6 bar89... isolation i so = -| s 21 | 2 = ? (f) v r = parameter BAR89-02LRH in series configuration, z = 50 ? 0 1 2 3 4 ghz 6 f -30 -25 -20 -15 -10 db 0 | s 21 | 0 v 1 v 10 v
2007-04-19 7 bar89... package tslp-2-7 1 2 0.05 0.6 1 2 0.05 0.65 0.035 0.25 1) 1 0.05 0.05 max. +0.01 0.39 -0.03 1) dimension applies to plated terminal cathode marking 1) 0.035 0.5 bottom view top view package outline foot print marking layout (example) standard packing reel ?180 mm = 15.000 pieces/reel reel ?330 mm = 50.000 pieces/reel (optional) for board assembly information please refer to infineon website "packages" 0.45 0.275 0.275 0.375 0.925 copper solder mask stencil apertures 0.35 1 0.6 0.35 0.3 0.76 4 1.16 0.5 cathode marking 8 bar90-02lrh type code cathode marking laser marking
2007-04-19 8 bar89... edition 2006-02-01 published by infineon technologies ag 81726 mnchen, germany ? infineon technologies ag 2007. all rights reserved. attention please! the information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (?beschaffenheitsgarantie?). with respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, infineon technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. information for further information on technology, delivery terms and conditions and prices please contact your nearest infineon technologies office ( www.infineon.com ). warnings due to technical requirements components may contain dangerous substances. for information on the types in question please contact your nearest infineon technologies office. infineon technologies components may only be used in life-support devices or systems with the express written approval of infineon technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. if they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
|
